25
KX-TG9581B/KX-TG9582B/KX-TGA950B
Note:
(*1) When you enter the address or New Data, please refer to the table below.
Frequently Used Items (Base Unit)
ex.)
7). Press
{
OK
}
, a long confirmation beep
will be heard.
8). Press to return to standby mode.
After that, turn the base unit power off and then power on.
New Data
_ _ _ _ _ _
Set Addr.:
Set Addr.:
{
OFF
}
CLEAR
OK
BACK
Desired Number (hex)
Input Keys
Desired Number (hex)
Input Keys
0
0
A
[Flash] + 0
1
1
B
[Flash] + 1
.
.
C
[Flash] + 2
.
.
D
[Flash] + 3
.
.
E
[Flash] + 4
9
9
F
[Flash] + 5
Items
Address
Default Data
New Data
Remarks
C-ID (FSK) sensitivity (LINE 1)
0FFA
0D
06(6dB UP)
03(12dB UP) When hex changes from “0D” to “06” or “03”
gain increases by 6dB or 12dB for line1.
C-ID (FSK) sensitivity (LINE 2)
0F1C
0D
06(6dB UP)
03(12dB UP) When hex changes from “0D” to “06” or “03”
gain increases by 6dB or 12dB for line2.
Frequency
00 07 / 00 08
70/02
-
-
Use these items in a
READ-ONLY
mode to
confirm the contents. Careless rewriting may
cause serious damage to the computer system.
ID
00 02 ~ 00 06
Given value
-
-
Bell /Melody
length
for LINE1
0560
3C (6 sec)
-
-
This is time until bell stops ringing.
time interval: 100 msec)
When hex changes from “3C” to “32” length
decreases from 6sec to 5sec.
for LINE2
0B81
3C (6 sec)
-
-
This is time until bell stops ringing.
time interval: 100 msec)
When hex changes from “3C” to “32” length
decreases from 6sec to 5sec.
