Programming
21
*1 If “System setting” column is checked, you do not need to program the same item
using another handset.
*2 If you subscribe to Caller ID service and want to view the caller’s information after
lifting up the handset to answer a call, turn off this feature.
*3 Turn this feature off if you prefer not to hear key tones while you are dialing or
pressing any keys, including confirmation tones and error tones.
*4 If you select one of the melody ringer tones, the ringer tone will continue to play for
several seconds even if the caller has already hung up. You may either hear a dial
tone or no one on the line when you answer the call.
*5 The flash time depends on your telephone exchange or host PBX. Contact your
PBX supplier if necessary.
*6 Generally, the line mode setting should not be adjusted. If
“
Line in use
”
is not
displayed when another phone connected to the same line is in use, you need to
change the line mode to
“
A
”
.
*7 If the Caller ID time and date display service is available in your area, this feature
allows the unit to automatically adjust the date and time setting when caller
information is received. To use this feature, set the date and time first.
Time adjustment
*7
(Caller ID subscribers
only)
{
2
}{
2
}{
6
}
{
1
}
:
Caller ID[auto]
{
0
}
: <
Manual
>
r
–
Feature
Feature
code
Setting code
System
setting
*1
Page
TG9361BX(e)_OI.book Page 21 Wednesday, April 16, 2008 3:08 PM
