Panasonic KX-TG9361B Operating Instructions Manual Download

Page: 54 / 60

Useful Information

For assistance, please visit http://www.panasonic.com/help

Notice

ENERGY STAR

As an

NERGY

TAR

Participant,

Panasonic has determined that this

product meets the

NERGY

TAR

guidelines for energy efficiency.

NERGY

TAR is a U.S. registered

mark.

interference is experienced, move the
cordless telephone further away from
the TV or VCR. This will often reduce,
or eliminate, interference.

FCC RF Exposure Warning:

This product complies with FCC

radiation exposure limits set forth for
an uncontrolled environment.

To comply with FCC RF exposure

requirements, the base unit must be
installed and operated 20 cm (8
inches) or more between the
product and all person’s body
(excluding extremities of hands,
wrist and feet).

This product may not be collocated

or operated in conjunction with any
other antenna or transmitter.

The handset may be carried and

operated with only the specific
provided belt-clip. Other non-tested
belt-clips or similar body-worn
accessories may not comply and
must be avoided.

Notice

FCC ID can be found inside the

battery compartment or on the
bottom of the units.

TG936x_OI.book Page 54 Wednesday, January 2, 2008 9:12 AM

Summary of Contents for KX-TG9361B





























































Search results

Summary of Contents for KX-TG9361B

Reviews:

Related manuals for KX-TG9361B

Brands by name

Popular brands

Panasonic KX-TG9361B, Operating Instructions Manual

Search results

Summary of Contents for KX-TG9361B

Reviews:

Related manuals for KX-TG9361B

Brands by name

Popular brands