Programming
29
For assistance, please visit http://www.panasonic.com/help
Note:
L
To stop the alarm, press any dial key
or place the handset on the base unit
or charger.
L
When the handset is in use, the alarm
will not sound until the handset is in
standby mode.
L
If the talking alarm clock is set at the
same time for two or more handsets,
the first handset makes the
announcement, while the other
handsets only sound the tone.
L
If the other unit is in use at the set
time, the handsets sound the tone
instead of the selected
announcement.
L
If you select
“
Once
”
, the setting
changes to
“
Off
”
after the alarm
sounds.
L
When the ringer volume for outside
calls is set to off (page 24), the alarm
sound is heard at a low level.
Customer support
The handset can display the Internet
address where you can download the
operating instructions or get further
information for this product by using your
computer.
1
{
MENU
}
i
{#}{
6
}{
8
}{
0
}
2
{
OFF
}
Registering a unit
Operating additional
handsets
Additional handsets
Up to 6 handsets can be registered to
the base unit.
Important:
L
See page 6 for information on the
available model.
Registering a handset to a
base unit
The supplied handset and base unit are
pre-registered. If for some reason the
handset is not registered to the base
unit, register the handset.
1
Handset:
{
MENU
}
i
{#}{
1
}{
3
}{
0
}
2
Base unit:
■
KX-TG9361
Press and hold
{
LOCATOR
}
for 4
seconds. (No registration tone)
■
KX-TG9371/KX-TG9372
Press and hold
{
LOCATOR
}
for 4
seconds until the registration tone
sounds.
L
If all registered handsets start
ringing, press the same button to
stop. Then repeat this step.
L
The next step should be
completed within 90 seconds.
3
Handset:
Press
{
OK
}
, then wait until a long
beep sounds.
4
{
OFF
}
TG936x_OI.book Page 29 Wednesday, January 2, 2008 9:12 AM
