manualshive.com logo in svg

Panasonic KX-TG9331BXT, Service Manual

The Panasonic KX-TG9331BXT is a high-quality cordless phone set that offers exceptional performance and user-friendly features. Easily navigate through its functions by referring to the comprehensive service manual. Download the manual for free from our website, ensuring you have all the information you need to make the most of this fantastic product.

Share
Download
background image

24

                     KX-TG9331BXT/KX-TGA931BXT/KX-TGA930BXT                            

4.7.5.

Sending Signal

The voice signal from the microphone is input to DSP (90, 91). CN431 is the headset jack. When the headphone is connected,
the R436/R437 detects it. The input from the microphone of the handset (MIM, MIP) is cut and the microphone signal from the
headset is input to DSP (95). Also the power for the microphone is supplied from DSP (92) and the power is turned OFF on
standby.

4.7.6.

Reception Signal

The voice signal from the base unit is output to DSP (98). This signal is led to the headset jack (CN431). The signal through the
headset jack and the other signal output from DSP (97) drives the speaker. When the headset is inserted to the jack, the voice
signal is cut at the jack, so the sound does not come out from the speaker, but from the headset only.

Summary of Contents for KX-TG9331BXT

















































































































Reviews:

No comments

Related manuals for KX-TG9331BXT

Canon FAXPHONE L190 Basic Operation Gude preview
FAXPHONE L190
Brand: Canon Pages: 100
Canon FAXPHONE L80 Basic Manual preview
FAXPHONE L80
Brand: Canon Pages: 124
Canon FAXPHONE L80 User Manual preview
FAXPHONE L80
Brand: Canon Pages: 203
Canon FAXPHONE L190 Starter Manual preview
FAXPHONE L190
Brand: Canon Pages: 28
Clarke 7310000 Operation & Maintenance Instructions preview
7310000
Brand: Clarke Pages: 4
Insportline IN 9100 User Manual preview
IN 9100
Brand: Insportline Pages: 9
Fastech Ezi-SERVO ST Operating Manual preview
Ezi-SERVO ST
Brand: Fastech Pages: 38
Singer 14U 32A Operator'S Manual preview
14U 32A
Brand: Singer Pages: 24
Clipper CLP12IA Operating Instructions Manual preview
CLP12IA
Brand: Clipper Pages: 42
Dürkopp Adler 755 B Operating Instructions Manual preview
755 B
Brand: Dürkopp Adler Pages: 374
Clarke 08001B Operator'S Manual preview
08001B
Brand: Clarke Pages: 65
Star Trac Fitness E-ST 5090 Owner'S Manual preview
Fitness E-ST 5090
Brand: Star Trac Pages: 28
Stern Pinball The Monsters Service And Operation Manual preview
The Monsters
Brand: Stern Pinball Pages: 52
Janome FA4 Service Manual preview
FA4
Brand: Janome Pages: 29
Ricoh FAX RF01F Service Manual preview
FAX RF01F
Brand: Ricoh Pages: 87
Global 3700 AUT Series Instructions And Operating Manual preview
3700 AUT Series
Brand: Global Pages: 83
EDNord Fastback 9 User Manual preview
Fastback 9
Brand: EDNord Pages: 30
BETCO Optima XR 21 Operator And Parts Manual preview
Optima XR 21
Brand: BETCO Pages: 18

Brands by name

Popular brands

Load more brands