Panasonic KX-TG9321, Operating Instructions Manual

Page: 15 / 56

Making/Answering Calls
15
For assistance, please visit http://www.panasonic.com/help
Making calls
1
Lift the handset and dial the phone
number.
L
To correct a digit, press
{
CLEAR
}
.
2
{C}
L
An available line is automatically
selected and the line number is
displayed. To change the line
selection mode, see page 14.
L
You can also select the line
manually by pressing
{
LINE 1
}
or
{
LINE 2
}
.
3
When you finish talking, press
{
OFF
}
or place the handset on the
base unit or charger.
Note:
L
When 2 or more handsets are
registered,
2 outside calls can be handled
simultaneously on separate telephone
lines.
Example: While line 1 is in use, you
can make or answer a call on line 2 at
the same time.
Using the speakerphone
1
During a conversation, press
{s}
to
turn on the speakerphone.
L
Speak alternately with the other
party.
2
When you finish talking, press
{
OFF
}
.
Note:
L
For best performance, use the
speakerphone in a quiet environment.
L
To switch back to the receiver, press
{C}
.
Adjusting the receiver or speaker
volume
Press
{^}
or
{V}
repeatedly while
talking.
Making a call using the redial list
The last 10 phone numbers dialed are
stored in the redial list (each 48 digits
max.).
1
{
REDIAL
}
2
{V}
/
{^}
: Select the desired phone
number.
3
{C}
Erasing a number in the redial list
1
{
REDIAL
}
2
{V}
/
{^}
: Select the desired phone
number.
i
{
ERASE
}
3
{V}
/
{^}
: “
Yes
”
i
{
SELECT
}
4
{
OFF
}
Pause (for PBX/long distance service
users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 21).
Example: If you need to dial the line
access number “9” when making outside
calls with a PBX:
1
{
9
}
i
{
PAUSE
}
2
Dial the phone number.
i
{C}
Note:
L
A 3.5 second pause is inserted each
time
{
PAUSE
}
is pressed. Repeat as
needed to create longer pauses.
TG9321(e).book Page 15 Friday, May 28, 2010 4:34 PM