Programming
32
busy tone to the caller, and then
disconnects the call.
Important:
L
When the unit receives a call from a
number that is stored in the call barred
list, the call is logged in the caller list
(page 42) with
7
after the call is
disconnected.
Storing unwanted callers
You can store up to 30 phone numbers in
the call barred list.
Important:
L
You must store the phone number
with an area code in the call barred
list.
■
From the caller list:
1
{
3
}
(
y
)
2
{
r
}
: Select the entry to be barred.
s
M
s
I
3
{
r
}
:
“
Caller Barred
”
s
M
4
{
r
}
:
“
Yes
”
s
M
s
{i
c
}
■
By entering phone numbers:
1
1
(middle soft key)
y
217
s
m
2
Enter the phone number (24
digits max.).
s
M
L
To erase a digit, press
^
.
3
{i
c
}
Viewing/editing/erasing bar call
numbers
1
1
(middle soft key)
y
217
2
{
r
}
: Select the desired entry.
L
To exit, press
{i
c
}
.
3
To edit a number:
~
s
Edit the phone number.
s
M
s
{i
c
}
To erase a number:
W
s
{
r
}
:
“
Yes
”
s
M
s
{i
c
}
Note:
L
When editing, press the desired dial
key to add,
^
to erase.
Storing an area code to be
deleted automatically
In some situations, phone numbers
stored automatically in the caller list
(page 42) will include area codes. If you
do not want to dial the area code when
making calls from the caller list, you can
store the area code which you want the
unit to delete automatically.
Example:
You have stored the area
code “09”. If you make a call from the
caller list to the phone number “09-456-
7890”, the unit dials “456-7890”.
1
1
y
255
2
Enter an area code (5 digits max.).
s
M
s
{i
c
}
Note for New Zealand:
L
The use of this feature can prevent a
National Call from being dialled. E.g.,
in the case of the South Island, the
“03” will be omitted and will therefore
prevent a National Call to other areas
of the South Island.
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign
up to 6 phone numbers to be restricted,
and select which handsets are to be
restricted. Storing area codes here
prevents the restricted handsets from
dialling any phone number in that area
code.
1
1
(middle soft key)
y
256
2
Enter the base unit PIN (default:
“
0000
”
).
L
If you forget your PIN, contact an
authorised service centre.
TG862xAZ(e).book Page 32 Thursday, May 12, 2011 1:39 PM
