Panasonic KX-TG8411FX Operating Instructions Manual Download Page 58

Page: 58 / 64

Useful Information

Caller ID

Problem

Cause/solution

Caller information is not
displayed.

You must subscribe to a Caller ID service.
Contact your service provider/telephone
company for details.

If your unit is connected to any additional
telephone equipment, remove and plug the
unit directly into the wall jack.

If you use a DSL/ADSL service, we
recommend connecting a DSL/ADSL filter
between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for
details.

Other telephone equipment may be interfering
with this unit. Disconnect the other equipment
and try again.

Caller information is slow to
display.

Depending on your service provider/
telephone company, the unit may display the
caller’s information at the 2nd ring or later.

Move closer to the base unit.

Time on the unit has shifted.

Incorrect time information from incoming
Caller ID changes the time. Set the time
adjustment to

“

Manual

”

(off) (page 25).

TG8411-8421FX(e).book Page 58 Tuesday, March 3, 2009 2:54 PM

Summary of Contents for KX-TG8411FX

































































Search results

Summary of Contents for KX-TG8411FX

Reviews:

Related manuals for KX-TG8411FX

Brands by name

Popular brands

Panasonic KX-TG8411FX, Operating Instructions Manual

Search results

Summary of Contents for KX-TG8411FX

Reviews:

Related manuals for KX-TG8411FX

Brands by name

Popular brands