L
Base Unit Settings
30
Other Options
Line Select
(
“
Auto
”
): page 15
—
Base Unit PIN
Change base unit PIN (
“
0000
”
).
*4
– Enter the current 4-digit base unit
PIN.
*5
– Enter the new 4-digit base unit
PIN.
i
#
i
{ih}
—
Repeater Mode
(
“
Off
”
): page 44
—
Country
Change the unit’s region setting
(
“
Other
”
): page 31
—
*1 When the ringer volume is turned off,
and/or
is displayed and the
base unit does not ring for outside calls.
However, when the ringer volume for both lines is turned off, the base unit will
still ring at the minimum level for intercom calls.
*2 Change the recall/flash time, if necessary, depending on the requirements of
your service provider/telephone company or PBX.
*3 When using the unit in Czech/Slovakia/Turkey, select the recall/flash time as
follows:
Czech/Slovakia =
“
100 msec.
”
Turkey =
“
200 msec.
”
If you change the unit’s region setting/reset the base unit, the recall/flash time
will be reset to the default setting. In this case, select the recall/flash time
again.
*4 If you change the PIN, please make note of your new PIN. The unit will not
reveal the PIN to you.
*5 If you forget your PIN, consult your nearest Panasonic service centre.
Menu
Sub-menu
(default setting)
Sub-menu 2
(default setting)
TG8280FX(e).book Page 30 Tuesday, September 11, 2007 1:52 PM
