Preparation
13
Battery charge
Place the handset on the base unit for
about 7 hours before initial use.
When charging,
“
Charging
”
will be
displayed.
When the batteries are fully charged,
“
Charge Completed
”
will be
displayed.
L
The charge indicator lights up when
the handset is placed on the base unit.
Note:
L
It is normal for the handset to feel
warm during charging.
L
If you want to use the unit
immediately, charge the batteries for
at least 15 minutes.
L
Clean the charge contacts of the
handset and base unit with a soft, dry
cloth once a month. Clean more often
if the unit is subject to the exposure of
grease, dust, or high humidity.
Battery level
Panasonic Ni-MH battery
performance (supplied batteries)
Note:
L
It is normal for batteries not to reach
full capacity at the initial charge.
Maximum battery performance is
reached after a few complete cycles of
charge/discharge (use).
L
Actual battery performance depends
on a combination of how often the
handset is in use and how often it is
not in use (standby).
L
Even after the handset is fully
charged, the handset can be left on
the base unit without any ill effect on
the batteries.
L
The battery level may not be
displayed correctly after you replace
the batteries. In this case, place the
handset on the base unit and let it
charge for at least 7 hours.
Battery icon
Battery level
1
High
2
Medium
3
Low
L
When flashing:
Needs to be
charged.
Operation
Operating
time
In continuous use
12 hours max.
In continuous
standby mode
150 hours
max.
TG8280FX(e).book Page 13 Tuesday, September 11, 2007 1:52 PM
