background image

Answering System

31

Answering system

The answering system can answer and 
record calls for you when you are 
unavailable to answer the phone.

Important:

L

Only 1 person can access the 
answering system (listen to 
messages, record a greeting 
message, etc.) at a time.

L

When callers leave messages, the 
unit records the day and time of each 
message. Make sure the date and 
time have been correctly set (page 
16).

Memory capacity

The total recording capacity (including 
your greeting message and caller 
messages) is about 16 minutes. A 
maximum of 64 messages can be 
recorded.

Note:

L

If message memory becomes full:
– “

Messages full

” is shown on the 

handset display

– the message indicator on the base 

unit flashes rapidly

L

When the message memory 
becomes full, the greeting message is 
different depending on your situation:
– If you use the prerecorded greeting 

message, the unit automatically 
switches to another prerecorded 
greeting message asking callers to 
call again later.

– If you recorded your own greeting 

message, the same message is still 
announced to callers even though 
their messages are not recorded.

Turning the answering 
system on/off

Using the base unit

Press 

{

s

}

 (ANSWER ON) to turn on/

off the answering system.

L

When the answering system is turned 
on, the ANSWER ON indicator lights 
up.

Using the handset

1

{

MENU

}

 (centre of joystick) 

i

 

I

 

i

 

{

SELECT

}

2

{V}

/

{^}

: “

Answer on

” or “

Answer 

off

i

 

{

SELECT

}

 

i

 

{

OFF

}

Call screening

While a caller is leaving a message, you 
can listen to the call through the 
handset’s speaker.
You can answer the call by pressing 

{C}

 on the handset.

Note:

L

To temporarily mute call screening on 
the handset, press 

{

SILENCE

}

. To 

screen again in the call, push the 
joystick up accordingly.

L

To turn this feature off, see page 37.

Available for:

KX-TG8231/KX-TG8232

TG8202C_TG8231C_8232C(e).book  Page 31  Friday, July 27, 2007  4:48 PM

Summary of Contents for KX-TG8202C

























































Reviews: