DECT repeater
Problem
Cause/solution
The unit does not work.
R
When the indicators do not light, the AC adaptor is not
connected properly. Check the connections.
R
When the indicators do not light green, move the unit closer to
the base unit.
R
Registration may have been cancelled. Deregister the unit, then
re-register.
Deregister:
1
Unplug the AC adaptor, then press and hold
M
PROGRAM
N
.
2
While pressing and holding
M
PROGRAM
N
, re-connect the
AC adaptor.
3
Keep holding to press
M
PROGRAM
N
for about 10 seconds
until the
indicator stops flashing and lights red. Then
release
M
PROGRAM
N
.
R
The
and
indicators light amber for a moment
then only the
indicator flashes red.
R
If the
indicator flashes green after releasing
M
PROGRAM
N
, deregistration failed. Deregisterthe unit
again.
Re-register:
1
DECT repeater:
Unplug the AC adaptor.
2
Base unit:
Press and hold
M
N
for about 5 second, until
the registration tone sounds.
R
The next step must be completed within 90 seconds.
3
DECT repeater:
Connect the AC adaptor, then wait until
the
indicator and
indicator light green.
4
Base unit:
To stop the registration tone, press
M
N
.
While talking using the
handset, sound cuts in
and out.
R
The handset is out of range. Move the handset closer to this
unit.
A repeating tone is heard
while talking using the
handset.
or
The
indicator
continues to light amber
and the
indicator
flashes green.
R M
PROGRAM
N
was pressed. The unit is in programming mode.
To exit, press
M
PROGRAM
N
again. Do not press
M
PROGRAM
N
,
except when deregistering the unit.
52
Useful Information
TG80xxAL_NZ(en)_1021_ver001-2.pd52 52
2011/10/21 15:09:44
