Panasonic KX-TG7851TU Page 37 Operating Instructions Manual Download | Manualshive

Page: 37 / 40

background image

Problem

Cause/solution

I cannot register a
handset to a base unit.

R

The maximum number of handsets (6) is already registered to
the base unit. Cancel unused handset registrations from the
base unit (page 27).

R

You entered the wrong PIN. If you forget your PIN, contact an
authorised service centre.

Battery recharge

Problem

Cause/solution

The handset beeps and/
or

flashes.

R

Battery charge is low. Fully charge the batteries (page 10).

I fully charged the
batteries, but
–

still flashes or

– the operating time

seems to be shorter.

R

Clean the battery ends (

,

) and the charge contacts with a

dry cloth and charge again.

R

It is time to replace the batteries (page 9).

Making/answering calls, intercom

Problem

Cause/solution

is displayed.

R

The handset is too far from the base unit. Move closer.

R

The base unit’s AC adaptor is not properly connected.
Reconnect AC adaptor to the base unit.

R

The handset is not registered to the base unit. Register it
(page 27).

R

Activating one touch eco mode reduces the range of the base
unit in standby mode. If required, turn eco mode off (page 14).

Noise is heard, sound
cuts in and out.

R

You are using the handset or base unit in an area with high
electrical interference. Re-position the base unit and use the
handset away from sources of interference.

R

Move closer to the base unit.

R

If you use a DSL/ADSL service, we recommend connecting a
DSL/ADSL filter between the base unit and the telephone line
jack. Contact your DSL/ADSL provider for details.

Sound quality seems to
be getting worse.

R

You have registered a handset that is not recommended
(page 3). The clearest sound quality is only possible by
registering the recommended handset.

The handset does not
ring.

R

The ringer volume is turned off. Adjust ringer volume (page 15,
22).

R

Night mode is turned on. Turn it off (page 25).

I cannot make a call.

R

The dialling mode may be set incorrectly. Change the setting
(page 13).

R

You dialled a call restricted number (page 26).

R

The key lock feature is turned on. Turn it off (page 17).

37

Useful Information

TG7851TU(en-en)_0718_ver011.pdf 37

2013/07/18 12:00:01

«
...
35
36
37
38
39
...
»

Summary of Contents for KX-TG7851TU









































Reviews:

No comments

Related manuals for KX-TG7851TU

Brand: NEC Pages: 12

Brand: Panasonic Pages: 8

Brand: Daewoo Pages: 13

Brand: UniData Communication Systems Pages: 8

WPU-7700 Enterprise Edition

Brand: UniData Communication Systems Pages: 41

Brand: Xblue Networks Pages: 60

Brand: Xblue Networks Pages: 2

Brand: Xblue Networks Pages: 260

Brand: Xblue Networks Pages: 2

Brand: Xblue Networks Pages: 241

Brand: Panasonic Pages: 80

Brand: PHOTON Pages: 48

Brand: Audiovox Pages: 40

Brand: VTech Pages: 1

Brand: Yealink Pages: 56

VoiceSonic VB-42210

Brand: Panasonic Pages: 40

Link2Cell KX-TGD862

Brand: Panasonic Pages: 89

Intenna CP-2525

Brand: Cobra Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands