Error messages
Display message
Cause/solution
Base no power
or
No link to base.
Reconnect main base
AC adaptor.
R
The handset has lost communication with the base unit. Move
closer to the base unit and try again.
R
Unplug the base unit’s AC adaptor to reset the unit. Reconnect
the adaptor and try again.
R
The handset’s registration may have been cancelled.
Re-register the handset (page 27).
Check Phone Line
R
The supplied telephone line cord has not been connected yet
or not connected properly. Check the connections (page 9).
Memory Full
R
The phonebook memory is full. Erase unwanted entries
(page 18).
R
The call barred list memory is full. Erase unwanted entries
(page 26).
Use rechargeable
battery.
R
A wrong type of battery such as Alkaline or Manganese was
inserted. Use only the rechargeable Ni-MH batteries noted on
page 3, 6.
You must first
subscribe to Caller
ID.
R
You must subscribe to a Caller ID service. Once you receive
caller information after subscribing to a Caller ID service, this
message will not be displayed.
35
Useful Information
TG7851TU(en-en)_0718_ver011.pdf 35
2013/07/18 12:00:01
