Preparation
11
Helpline Tel. No.: U.K. 08700 100 076 R.O.I. 01289 8333
Connections
When connecting the AC adaptor to the
base unit, a short beep will be heard. If it is
not heard, check the connections.
Note:
L
Never install telephone wiring during a
lightning storm.
L
The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)
L
The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight
of the adaptor may cause it to become
disconnected.
L
The unit will not work during a power
failure.
We therefore recommend you
also connect a corded-type telephone
(without AC adaptor) to the same
telephone line using a T-adaptor. Your
Panasonic sales shop can offer you more
information about connection possibilities.
Location
L
For maximum distance and noise-free
operation, place your base unit:
– away from electrical appliances such as
TVs, radios, personal computers or
other phones.
– in a convenient, high and central
location.
Battery
installation/replacement
Important:
L
Use only the included rechargeable
batteries noted on page 4, 7.
L
When replacing batteries, we recommend
using the Panasonic rechargeable
batteries noted on page 5, 7.
L
Wipe the battery ends (
S
,
T
) with a dry
cloth.
L
When installing the batteries, avoid
touching the battery ends (
S
,
T
) or the
unit contacts.
1
Press the notch on the handset cover
firmly and slide it in the direction of the
arrow.
L
When replacing batteries, remove the
old batteries positive (
S
) end first.
2
Insert the batteries negative (
T
) end
first. Close the handset cover.
Use only the included AC
adaptor and telephone
line cord.
(220
–
240 V, 50 Hz)
To telephone
network
Hook
TG7160-7180E(e).book Page 11 Thursday, July 27, 2006 12:45 PM
