Using SMS
SMS allows you to send and receive text
messages between other fixed-line and mobile
phones that support compatible SMS
networks and features.
Important:
R
To use SMS features, you must:
– subscribe to a Caller ID and/or an
appropriate service such as SMS.
– confirm that SMS is turned on.
– confirm that the correct message centre
numbers are stored.
Contact your service provider/telephone
company for details and availability.
Note:
R
A total of 47 messages (at 160 characters/
message) can be saved. Total number may
be more than 47 if length of messages is
less than 160 characters/message.
R
If the unit is connected to a PBX system,
you may not be able to use SMS features.
Turning SMS on/off
1
#357
2
MbN
: Select the desired setting.
a
a
M
N
Storing SMS message
centre numbers
SMS message centre numbers must be
stored in order to send and receive SMS
messages.
For Czech:
The message centre numbers (used for SMS
services provided by Telefonica O2) are
preprogrammed in this unit. You can change
them if necessary.
For Slovakia:
The message centre numbers (used for SMS
service provided by Slovak Telecom - T-Com)
are preprogrammed in this unit. You can
change them if necessary.
R
Contact your service provider/telephone
company for more information.
R
If you change the unit’s region setting/reset
the base unit, the stored message centre
numbers will be deleted or changed
(page 23). In this case, store the numbers
again if necessary.
1
To store
“
Message Centre1
”
:
#351
To store
“
Message Centre2
”
:
#352
2
Edit the number as necessary.
a
a
M
N
Note:
R
For PBX users:
– You need to add the PBX line access
number and a dialling pause to the
beginning of the Message Centre 1
number.
– If you only use the Message Centre 1
number for SMS, store the Message
Centre 1 number as is (without adding a
line access number or dialling pause) to
Message Centre 2.
Sending a message
Writing and sending a new
message
1
a
a
2
MbN
:
“
Create
”
a
3
Enter a message.
a
R
You can change the character entry
mode by pressing
(page 38).
4
Enter the destination phone number (20
digits max.).
a
To use the redial list:
MEN
(
T
)
a
MbN
: Select the phone
number.
a
2 times
To use the caller list:
MFN
( )
a
MbN
: Select the party.
a
2 times
R
If is displayed, not all of the
information is shown. To see the
33
SMS (Short Message Service)
TG6711_51FX(en)_0803_ver101.pdf 33
2012/08/03 11:58:57
