Sub-menu 1
Sub-menu 2
Settings
Code
Night Mode
On/Off
1:
On
0:
<
Off
>
#238
26
Start/End
<23:00/06:00>
#237
27
Ring Delay
1:
30 sec.
2:
<
60 sec.
>
3:
90 sec.
4:
120 sec.
0:
No Ringing
#239
27
First Ring
*1,
*7
–
1:
<
On
>
0:
Off
#173
–
*1 If you program these settings using one of the handsets, you do not need to program the
same item using another handset.
*2 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select
“
Caller ID
”
. To turn this feature off, select
“
Manual
”
.
(Caller ID subscribers only)
To use this feature, set the date and time first (page 13).
*3 If you select the unit’s region setting (page 28) to
“
Česká rep.
”
or
“
Slovensko
”
, the
default setting will be changed for the selected country.
*4 If you select the unit’s region setting (page 28) to
“
Česká rep.
”
or
“
Slovensko
”
, the
default setting is
“
On
”
.
*5 The ringer tone may continue to play for several seconds even if the caller has already hung
up. You may either hear a dial tone or no one on the line when you answer the call.
*6 The preset melodies in this product are used with permission of © 2010 Copyrights Vision
Inc.
*7 If you do not want the unit to ring before the caller information is received, set to
“
Off
”
.
(Caller ID subscribers only)
You can only remove the first ring if the unit rings two times or more by default, which
depends on your service provider/telephone company.
*8 Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*9 If you subscribe to a Caller ID service and want to view the caller’s information after lifting up
the handset to answer a call, turn off this feature.
*10 The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*11 The default setting will be as follows if you select the following regional codes when
changing the unit’s region setting (page 28):
“
Česká rep.
”
=
“
100 msec.
”
“
Slovensko
”
=
“
100 msec.
”
*12 To prevent other users from joining your conversations with outside callers, turn this feature
on.
*13 KX-TG6751FX
*14 KX-TG6711FX
*15 This menu is not displayed when scrolling through the display menus. It is only available in
direct command code.
25
Programming
TG6711_51FX(en)_0803_ver101.pdf 25
2012/08/03 11:58:56
