Panasonic KX-TG6451FX Operating Instructions Manual Download Page 46 | Manualshive

Page: 46 / 48

background image

Useful Information

46

Answering system (KX-TG6461)

Liquid damage

Caution:

L

To avoid permanent damage, do not use a microwave oven to speed up the drying process.

Problem

Cause/solution

The unit does not record new
messages.

L

The answering system is turned off. Turn it on (page 31).

L

The message memory is full. Erase unnecessary messages
(page 32).

L

The recording time is set to

“

Greeting Only

”

. Change the

setting (page 35).

L

If your own greeting message is not recorded properly, callers
may not leave a message. Record your own greeting message
again (page 31).

L

If you subscribe to a voice mail service, messages are recorded
by your service provider/telephone company, not your
telephone. Change the unit’s number of rings setting or contact
your service provider/telephone company (page 35).

My own greeting message cannot
be properly heard.

L

Record your own greeting message again (page 31).

I cannot operate the answering
system.

L

Someone is using the unit. Wait for the other user to finish.

L

A caller is leaving a message. Wait for the caller to finish.

L

The handset is too far from the base unit. Move closer.

I cannot operate the answering
system remotely.

L

You are entering the wrong remote access code. If you have
forgotten your remote access code, enter the remote access
code setting to check your current code (page 33).

L

Press each key firmly.

L

The answering system is turned off. Turn it on (page 34).

L

You are using a rotary/pulse telephone. Try again using a
touch-tone phone.

While recording a greeting
message or listening to
messages, the unit rings and the
operation stops.

L

A call is being received. Answer the call and try again later.

Problem

Cause/solution

Liquid or other form of moisture
has entered the base unit/
handset.

L

Disconnect the AC adaptor and telephone line cord from the
base unit. Remove the batteries from the handset and leave to
dry for at least 3 days. After the base unit/handset are
completely dry, reconnect the AC adaptor and telephone line
cord. Insert the batteries and charge fully before use. If the unit
does not work properly, contact an authorised service centre.

TG6451_6461FX(e-e).book Page 46 Monday, May 4, 2009 8:55 AM

«
...
44
45
46
47
48
»

Summary of Contents for KX-TG6451FX

















































Reviews:

No comments

Related manuals for KX-TG6451FX

Brand: COMPANION Pages: 18

Brand: TRIGA Pages: 33

Brand: T-Mobile Pages: 16

Brand: AT&T Pages: 40

Brand: OCL Pages: 2

Brand: Flying Voice Pages: 64

Brand: Panasonic Pages: 4

Brand: Panasonic Pages: 4

EASA-PHONE KX-T30820

Brand: Panasonic Pages: 6

EXAI 3248 Series

Brand: Uniden Pages: 68

Brand: SAN/BAR Pages: 11

Brand: Panasonic Pages: 56

Brand: Panasonic Pages: 56

Brand: Panasonic Pages: 56

Brand: GE Pages: 38

Brand: GE Pages: 84

Brand: GE Pages: 2

Brand: GE Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands