Preparation
9
Setting up the base unit
Connecting the AC adaptor and
telephone line cord
Connect the telephone line cord until it
clicks into the base unit (
A
) and telephone
line jack (
B
). Connect the AC adaptor cord
by pressing the plug firmly (
C
).
L
Use only the included Panasonic AC
adaptor PQLV1.
Note:
L
The AC adaptor must remain connected
at all times. (It is normal for the adaptor
to be warm when in use.)
L
The AC adaptor should be connected to
a vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to
a ceiling-mounted AC outlet, as the
weight of the adaptor may cause it to
become disconnected.
L
The unit will not work during a power
failure. We recommend connecting a
corded telephone to the same telephone
line or to the same telephone jack using
a T-adaptor.
If you subscribe to a DSL service
Please attach a noise filter (contact your
DSL provider) to the telephone line
between the base unit and the telephone
line jack in the event of the following:
– Noise is heard during conversations.
– Call Display features (page 24) do not
function properly.
Hook
(120 V AC,
60 Hz)
To single-line
telephone jack
(RJ11C)
A
B
C
Noise filter
To single-line
telephone
jack (RJ11C)
TG5671C(e).book Page 9 Tuesday, February 14, 2006 9:59 AM