Making/Answering Calls
18
Using the base unit
1
{
SP-PHONE
}
2
Speak into the MIC.
3
When you finish talking, press
{
SP-
PHONE
}
.
Adjusting the ringer volume
Press
{^}
or
{V}
repeatedly to select the
desired volume when in standby mode.
L
To turn the ringer off, press and hold
{V}
until the unit beeps 2 times.
Setting the ringer tone
There are 3 tones.
1
Press
{^}
or
{V}
.
2
Within 10 seconds, press
{
<
}
or
{
>
}
repeatedly to select the desired tone.
Useful features during a
call
HOLD button
This feature allows you to put an outside
call on hold.
1
Press
{
HOLD
}
during an outside call.
L
To transfer the call to the base unit,
continue from step 2 on page 41,
“Transferring calls, conference calls”.
2
Press
{
HOLD
}
again.
L
To release the hold, press
{C}
.
L
The base unit user can take the call
by pressing
{
SP-PHONE
}
.
Press
{
HOLD
}
during an outside call.
L
To release the hold, press
{
SP-
PHONE
}
.
L
The handset user can take the call by
pressing
{C}
.
Note for handset and base unit:
L
If another phone is connected on the
same line (page 9), you can also take
the call by lifting its handset.
L
If a call is kept on hold for more than 6
minutes, an alarm tone starts to sound.
After 4 additional minutes on hold, the
call is disconnected.
Handset
Base unit
TG5671C(e).book Page 18 Tuesday, February 14, 2006 9:59 AM