![background image](http://html.mh-extra.com/html/panasonic/kx-tg5480/kx-tg5480_operating-instructions-manual_257712085.webp)
Answering System
Preparation
85
T
e
lephone System
Useful Info
rmation
For assistance, please call: 1-800-211-PANA(7262)
Troubleshooting
If the handset display shows error messages, see “If the Following Appear on
Your Display...” (p. 84) for the Cause & Remedy.
Telephone System
Problem
Cause & Remedy
“
No link to base.
Move closer to
base and try
again.
” is displayed and an
alarm tone sounds.
•
The handset has lost communication with the
base unit. Walk closer to the base unit, and try
again.
•
Confirm the base unit’s AC adaptor is plugged in.
•
Raise the base unit antennas.
•
If the above remedies do not solve the
problem, the handset may have lost
communication with the base unit. Register
the handset again (p. 64).
Static, sound cuts in/out, fades.
Interference from other
electrical units.
•
Move the handset and base unit away from
other electrical appliances (p. 3).
•
Walk closer to the base unit.
•
Raise the base unit antennas.
•
Turn on the Clarity Booster feature (p. 35).
•
If the unit is connected to a telephone line with
DSL service, you may hear noise from the
receiver or speaker during conversations. We
recommend connecting a noise filter (contact
your DSL service provider) to the telephone
line between the base unit and the telephone
line jack.
The base unit/handset does
not ring.
•
The ringer volume is turned off. Set to high,
medium, or low (p. 23, 24).
The handset display is blank.
•
If the handset display is blank, fully charge the
battery (p. 15).
You cannot program any
function items.
•
Programming is not possible while the
handset or base unit is being used.
•
Do not pause for over 60 seconds while
programming.
•
Walk closer to the base unit.
•
While another user is listening to messages or
the Answering System is handling a call, you
cannot program. Try again later.
While programming or
searching, the handset or base
unit starts to ring and the
program/search stops.
•
A call is coming in. To answer the call, press
[
C
]
,
[
s
]
, or the called line soft key (
)
or (
) on the handset, or press
[SP-PHONE]
or the called line button on the
base unit. Start again from the beginning after
hanging up.
LI NE1
LI NE2
Summary of Contents for KX-TG5480
Page 99: ......