Useful Info
rmation
Answering
System
Preparatio
n
59
Special Features
T
e
lephone System
Re-registering the Handset
If “
No link to base. Move closer to base and try again.
” is
displayed even when using the handset near the base unit, the handset may have
lost communication with the base unit. You need to re-register the handset to that
base unit.
Make sure the base unit is not being used. Have both the handset and base
unit nearby during registration.
•
You can stop registration by pressing
[OFF]
on the handset and pressing
[LOCATOR/INTERCOM/TRANSFER]
on the base unit.
1
Handset:
Press
[MENU]
.
2
Handset:
Scroll to
“
Initial setting
”
by pressing
[
d
]
or
[
B
]
, t
hen press the soft key
(
).
3
Handset:
Scroll to “
Registration
” by pressing
[
d
]
or
[
B
]
,
then press the soft key (
).
4
Base unit:
Press and hold
[LOCATOR/INTERCOM/TRANSFER]
for 3 seconds.
•
The CHARGE indicator flashes. After the CHARGE indicator starts flashing,
the rest of the procedure must be completed within 1 minute.
5
Handset:
(1) Press the soft key (
).
(2) Wait until a long beep sounds and the
display shows the following.
•
Registration is complete.
Important:
Do not register other handsets to this base unit. Only the included handset can
operate properly with the KX-TG5471C base unit.
Handset & Base Unit
SELECT
Initial setting
SELECT
Registration
O K
Press LOCATOR
on base unit
for 3 sec.
Then press OK
BOX 1
BOX 2
O K
SP
I
PRIVACY
1
Handset [1]
Registered
IN USE
[2]
TG5471C(E).fm Page 59 Sunday, February 13, 2005 6:10 PM
