Panasonic KX-TG4771C, Operating Instructions Manual

Page: 35 / 48

answer the call first. To do so, contact your
service provider/telephone company.
Caller’s recording time
You can change the maximum message recording
time allowed for each caller. The default setting is
“
3 min
” .
Handset
1
M MENU N#305
2
MbN : Select the desired setting. a M SAVE N
a M OFF N
Selecting “ Greeting only ”
You can select “ Greeting only ” which sets the
unit to announce a greeting message to callers but
not record messages.
Select
“
Greeting only
” in step 2 on “Caller’s
recording time”, page 35.
Note:
R When you select “ Greeting only ” :
– If you do not record your own message, the
unit will play the pre-recorded greeting-only
message asking callers to call again later.
– If you use your own message, record the
greeting-only message asking callers to call
again later (page 31).
Message alert
You can select whether or not the message
indicator on the handset flashes slowly when new
messages are recorded. The default setting is
“
On
” .
Important:
R If you stored the Voice Mail access number
(page 36), the message indicator also flashes
for newly recorded Voice Mail messages
(page 36).
Handset
1
M MENU N#340
2
MbN : Select the desired setting. a M SAVE N
a M OFF N
Note:
R While message alert is on, battery operating
time is shortened (page 8).
35
Answering System
TG477xC(en-en)_1214_ver021.pdf 35 2011/12/14 16:37:36