Panasonic KX-TG4381NZ Operating Instructions Manual Download Page 14

Page: 14 / 52

Preparation

Battery charge

Place the handset on the base unit or
charger for about 7 hours before
initial use.

While charging,

“

Charging

”

displayed and the charge indicator on
the handset lights up. When the
batteries are fully charged,

“

Charge

completed

”

is displayed.

*1 KX-TG4382/KX-TG4392

Note:

It is normal for the handset to feel
warm during charging.

If you want to use the handset
immediately, charge the batteries for
at least 15 minutes.

Clean the charge contacts of the
handset, base unit, and charger with a
soft and dry cloth once a month. Clean
more often if the unit is exposed to
grease, dust, or high humidity.

Battery level

Note:

KX-TG4381/KX-TG4382

The batteries need to be charged if
the handset beeps while you are
engaged in a call.

KX-TG4391/KX-TG4392

The batteries need to be charged if
the handset beeps while you are
engaged in a call or operating the
answering system remotely.

Panasonic Ni-MH battery

performance (supplied batteries)

Note:

Actual battery performance depends
on a combination of how often the
handset is in use and how often it is
not in use (standby).

Even after the handset is fully
charged, the handset can be left on
the base unit or charger without any ill
effect on the batteries.

Base unit:

Charger

Battery icon

Battery level

High

Medium

Low

When flashing:
Needs to be
charged.

Empty

Operation

Operating time

In continuous
use

5 hours max.

Not in use
(standby)

11 days max.

While using the
clarity booster
feature (page
19)

3 hours max.

Summary of Contents for KX-TG4381NZ





















































Search results

Summary of Contents for KX-TG4381NZ

Reviews:

Related manuals for KX-TG4381NZ

Brands by name

Popular brands

Panasonic KX-TG4381NZ, Operating Instructions Manual

Search results

Summary of Contents for KX-TG4381NZ

Reviews:

Related manuals for KX-TG4381NZ

Brands by name

Popular brands