Panasonic KX-TG4011AGT Service Manual Download Page 63

Page: 63 / 66

KX-TG4011AGT/KX-TG4012AGT/KX-TG4013AGT/KX-TGA403AGT

14 Schematic Diagram

14.1. For Schematic Diagram

14.1.1. Base Unit (Schematic Diagram (Base Unit_Main))

14.1.1.1. Acoustic Testing Mode

Notes:

1. DC voltage measurements are taken with voltmeter from the negative voltage line.

2. The schematic diagrams may be modified at any time with the development of new technology.

14.1.2. Handset (Schematic Diagram (Handset_Main))

Notes:

1. DC voltage measurements are taken with an oscilloscope or a tester with a ground.
2. The schematic diagrams may be modified at any time with the development of new technology.

14.1.3. Charger Unit (Schematic Diagram (Charger Unit))

Notes:

1. DC voltage measurements are taken with voltmeter from the negative voltage line.

2. The schematic diagrams may be modified at any time with the development of new technology.

Summary of Contents for KX-TG4011AGT



































































Search results

Summary of Contents for KX-TG4011AGT

Reviews:

Related manuals for KX-TG4011AGT

Brands by name

Popular brands

Panasonic KX-TG4011AGT, Service Manual

Search results

Summary of Contents for KX-TG4011AGT

Reviews:

Related manuals for KX-TG4011AGT

Brands by name

Popular brands