Panasonic KX-TG3021NZ Page 43 Operating Instructions Manual Download

Page: 43 / 48

Useful Information

Programmable settings

Battery recharge

Problem

Cause/solution

I cannot program items.

Programming is not possible while either the
base unit or another handset is being used. Try
again later.

I cannot set the alarm.

In order to set the alarm, you must first set the
date and time (page 15).

The handset has lost communication with the
base unit. Move closer to the base unit, and try
again.

While programming, the
handset starts to ring.

A call is being received. Answer the call and start
again after hanging up.

Problem

Cause/solution

I fully charged the battery,
but

continues to

flash, or

is displayed.

Clean the charge contacts and charge again
(page 12).

The battery may need to be replaced with a new
one (page 11).

The handset display is
blank.

Confirm that the battery is properly installed.

Fully charge the battery (page 11).

While charging, the
charge indicator does not
light and “

Charge for

” is displayed.

The battery is empty. The charge indicator does
not light in order to concentrate on charging.
After about 5 minutes, the charge indicator lights
and “

Charging

” is displayed.

Summary of Contents for KX-TG3021NZ

















































Search results

Summary of Contents for KX-TG3021NZ

Reviews:

Related manuals for KX-TG3021NZ

Brands by name

Popular brands

Panasonic KX-TG3021NZ, Operating Instructions Manual

Search results

Summary of Contents for KX-TG3021NZ

Reviews:

Related manuals for KX-TG3021NZ

Brands by name

Popular brands