Answering System
33
L
You can hang up, or if you call from
a touch tone phone, you can enter
your remote code and begin
remote operation (page 32).
Skipping the greeting
message to leave a message
You can leave a message just as any
outside caller can. Call your phone
number. When the answering system
picks up, press
{*}
to skip the greeting
message and record your message
after the beep.
Answering system
settings
Remote code
A remote code must be entered when
operating the answering system
remotely. This code prevents
unauthorised parties from listening to
your messages remotely. The default
setting is “
11
”.
1
{
MENU
}
i
{
0
}{
6
}{
3
}
2
Enter the desired 2-digit remote
code.
i
{
Save
}
i
{
OFF
}
Ring count
You can change the number of times
the phone rings before the unit answers
calls.
The default setting is “
4
”.
“
Toll saver
”: The unit answers on
the 2nd ring when new messages have
been recorded, and on the 4th ring
when there are no new messages. If
you call your phone from outside to
listen to new messages (page 32), you
will know that there are no new
messages when the phone rings for the
3rd time. You can then hang up without
being charged for the call.
1
{
MENU
}
i
{
0
}{
6
}{
1
}
2
{V}
/
{^}
: Select the desired setting.
3
{
Save
}
i
{
OFF
}
For Telecom Call Minder or
TelstraClear Message Mailbox
service subscribers
To receive Call Minder or Message
Mailbox messages and use answering
system properly, please note the
following:
L
“Call Minder” and “Message Mailbox”
are services provided by your service
provider/telephone company. You will
need to first subscribe or activate this
service through your service provider/
telephone company. Consult your
service provider/telephone company
on how to operate this service and
how you will be notified that you have
messages.
To use this service you will be
required to leave your answering
machine off on your unit.
This will allow the service to receive
any messages.
L
To use the unit’s answering machine
rather than the service provided by
your service provider/telephone
company, please consult your service
provider/telephone company to have
it removed or deactivated
permanently or temporarily.
Alternatively you can leave this
service connected and change the
“
Ring count
” to a shorter duration
on your unit so your unit’s answering
machine can pick up the call prior to
the service provided by your service
provider/telephone company.
