91
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Problem
The Answering System is
on, but incoming messages
are not recorded.
“
” is displayed and
the ANSWER ON indicator
flashes rapidly, and no new
messages are recorded.
You cannot access a
mailbox from the base unit
or the handset.
You cannot access a
mailbox from a touch tone
phone.
While recording a greeting
message, the IN USE
indicator flashes quickly on
the base unit.
During playback, incoming
call tones are heard.
FULL
Cause & Remedy
•
The recording time is set to “Greeting only”. Select
“1 minute”, “2 minutes” or “3 minutes” (p. 24).
•
Memory is full. Erase some, or all, of the
messages (p. 69).
•
Memory is full. Erase some, or all, of the
messages (p. 69).
•
If more than one other user is using the
handsets and base unit, you may not be able
to access the mailboxes. Try again later.
•
If 2 other users are listening to messages in
the mailboxes, you cannot access a mailbox.
Try again later.
•
If the Answering System is responding to a
call and another user is listening to messages
in a mailbox, you cannot access a mailbox.
Try again later.
•
Your handset is too far from the base unit.
Walk closer to the base unit.
•
Make sure you enter the correct remote code
(p. 75).
•
If “
Enter Mailbox password
” is heard, Mailbox 2 or
3 has the password. Enter the password (p. 65).
•
The Answering System may not respond if
the tones are too short to activate the unit.
Press each button firmly.
•
The Answering System is off. Turn it on (p. 78).
•
To answer the call, press
(DIGITAL!SP-PHONE)
.
Start again from the
beginning after hanging up.
•
To answer the call, if you are using the base
unit, press
(DIGITAL!SP-PHONE)
. If you are
using the handset, press
or
.
For playback, start again from the beginning
after hanging up.
Answering System
Summary of Contents for KX-TG2730S - 2.4 GHz DSS Expandable Cordless...
Page 103: ......
