89
Useful Information
For assistance, please call: 1-800-211-PANA(7262)
Troubleshooting
Problem
“
No link to base.
Walk closer to
base and try
again.
” is displayed and
an alarm tone sounds.
Static, sound cuts in/out,
fades. Interference from
other electrical units.
The handset and/or the
base unit does not ring.
The handset display is
blank.
You cannot store a name
and phone number in the
directory.
While programming or
searching, the handset
starts to ring and stops the
program/search.
You cannot make an
internal/external call with
the handset.
Cordless Telephone
Cause & Remedy
•
You are too far from the base unit.
Walk closer to the base unit and try again.
•
Plug in the AC adaptor.
•
Raise the base unit antennas.
•
Locate the handset and the base unit away
from other electrical appliances (p. 3).
•
Walk closer to the base unit.
•
Raise the base unit antennas.
•
Press
Ü
on the handset to turn on the
Reception Booster feature (p. 29).
•
The ringer volume is OFF. Set to HIGH or
MEDIUM or LOW (p. 19, 59).
•
If more than one other user is using the
handsets and base unit, the handset/base
unit may not ring. Those users will hear
incoming call tones (p. 63) and the IN USE
indicator flashes quickly on the base unit.
•
Charge the battery fully (p. 12).
•
You cannot store an item in the directory while
the handset is in the talk, speakerphone,
intercom or Room Monitor mode, 2-Way Radio
mode or in the remote operation mode.
•
Do not pause for over 60 seconds while
storing.
•
To answer the call, press
or
. Start
again from the beginning after hanging up.
•
You cannot make a call when the handset is
in the remote operation mode. Exit the mode
by pressing
(OFF)
(p. 71).
•
If the 2-Way Radio mode is on, turn it off
(p. 58).
Summary of Contents for KX-TG2730S - 2.4 GHz DSS Expandable Cordless...
Page 103: ......
