Panasonic KX-TG2650ALN Operating Instructions Manual Download Page 58

Page: 58 / 64

Problem

The ringer/charge indicator
light does not go out while
charging.

You cannot have a
conversation using the
headset.

Remedy

•

This is normal.

•

Make sure that the headset is connected
properly (p. 49, 50).

•

may have been pressed. If the

button lights, press to continue the
conversation with the headset.

•

If “

EXIT=Headset

” is displayed on the

base unit, press

(EXIT)

to switch from

the speakerphone to the headset.

For Australian Customers

Panasonic Australia operates a toll free Customer Care Centre.
Please phone Panasonic on 132600 for assistance.

For New Zealand Customers

Panasonic New Zealand operates a toll free Customer Support
Centre.
Please phone 0800 Panasonic (0800 726276) for assistance.

Before Requesting Help

Summary of Contents for KX-TG2650ALN

































































Search results

Summary of Contents for KX-TG2650ALN

Reviews:

Related manuals for KX-TG2650ALN

Brands by name

Popular brands

Panasonic KX-TG2650ALN, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2650ALN

Reviews:

Related manuals for KX-TG2650ALN

Brands by name

Popular brands