Panasonic KX-TG2650ALN Operating Instructions Manual Download Page 10

Page: 10 / 64

Settings

Connections

•

USE ONLY WITH Panasonic AC ADAPTOR PQLV10AL.

•

The AC adaptor must remain connected at all times. (It is normal for the adaptor
to feel warm during use.)

•

To connect a standard telephone on the same line, see page 59.

•

If your unit is connected to a PBX which does not support Caller ID, you cannot
access those services.

•

KX-TG2650ALN and KX-TG2650NZN are not designed to be used with rotary
(pulse dialling) services.

Telephone Line Cord

AC Adaptor

Raise the antennas.

For New Zealand

To Single-Line
Telephone Jack

Telephone Line Cord

To Socket

For Australia

Telephone
Plug

Fasten the AC adaptor
cord to prevent it from
being disconnected.

Hook

To Power Outlet
(AC 230 V–240 V, 50 Hz)

Summary of Contents for KX-TG2650ALN

































































Search results

Summary of Contents for KX-TG2650ALN

Reviews:

Related manuals for KX-TG2650ALN

Brands by name

Popular brands

Panasonic KX-TG2650ALN, Operating Instructions Manual

Search results

Summary of Contents for KX-TG2650ALN

Reviews:

Related manuals for KX-TG2650ALN

Brands by name

Popular brands