Preparation
12
Battery installation/replacement
1
Press the notch of the handset cover
firmly, and slide it in the direction of the
arrow.
L
If necessary, remove the old battery.
2
Insert the battery (
A
), and press it
down until it snaps into position (
B
).
Then close the handset cover.
Important:
L
Use only the rechargeable Panasonic
battery noted on page 5.
Battery charge
Place the handset on the base unit or
charger for
6 hours
before initial use.
While charging:
– the
充电中
indicator on the base unit
lights.
– the battery icon on the handset display
goes through the cycle below.
Example:
Battery level
6
.
Note:
L
While charging, the battery icon
(example:
6
) does not go through
the above cycle, but remains still on the
display when:
– the handset is not registerd to the
base unit.
– the handset is out of range.
When the battery is fully charged,
5
remains on the display.
Base unit:
L
Model shown is KX-TG2620.
B
A
8
7
6
TG2620CN_2622CN.book Page 12 Friday, December 15, 2006 9:25 AM
