Programmable Settings
16
Telephone settings
Important:
L
Before setting, make sure the TALK
indicator is off. The handset must be
operated near the base unit and while off
the base unit.
Dialing mode
If you cannot make calls, change this
setting depending on your telephone line
service.
TONE (default): For tone dial service.
PULSE: For rotary pulse dial service.
1
{
PROG
}
L
The PROG indicator flashes.
2
{
MUTE
}
i
{
8
}
3
To select PULSE, press
{
1
}
.
OR
To select TONE, press
{
2
}
.
4
{
PROG
}
L
The handset beeps.
Registering the handset
If an alarm tone sounds when you press
{C}
,
{s}
, or when you press
{
PROG
}
then
{
MUTE
}
even when the handset is
near the base unit, you may need to re-
register the handset to the base unit.
Important:
L
Make sure the base unit is not being
used.
L
Have the handset and base unit near
each other when re-registering the
handset.
1
Base unit:
Press and hold
{
HANDSET
LOCATOR
}
until the CHARGE
indicator flashes.
L
After the CHARGE indicator starts
flashing, the rest of the procedure
must be completed within 1 minute.
2
Handset:
Press and hold
{
FLASH
}
until the VE
indicator flashes. Then wait until the
handset beeps.
TG2611C(e).book Page 16 Wednesday, January 25, 2006 4:45 PM
