background image

Useful Information

20

Wall mounting

Connect the telephone line cord. Mount 
the unit by inserting the mounting pins into 
the round openings on the adaptor (for pin 

2

, use round cut out at the bottom of the 

adaptor if you are using the 4 inches 
phone plate), then sliding the unit down to 
secure it.
Connect the AC adaptor to power outlet 
(page 7).

L

There are two common types of wall 
phone plates. The distance between 

1

 

and 

2

 may vary depending on the size 

of the wall phone plate installed.

RF Exposure Warning:

The product complies with IC radiation 
exposure limits set forth for an 
uncontrolled environment. To comply 
with IC RF exposure requirements, the 
base unit must be installed and operated 
with its antenna located 20 cm (8 inches) 
or more between antenna and all 
person’s body (excluding extremities of 
hands, wrist and feet). The handset may 
be carried and operated with only the 
optional specific belt-clip. Other non-
tested belt-clips or similar body-worn 
accessories may not comply and must 
be avoided. The product must not be 
collocated or operated in conjunction 
with any other antenna or transmitter.

83 mm

(3

1

/

4

 inches)

102 mm

(4 inches)

83 mm 

(3

1

/

4

 inches)

or

102 mm 

(4 inches)

1

1

2

2

TG2611C(e).book  Page 20  Wednesday, January 25, 2006  4:45 PM

Summary of Contents for KX-TG2611C

























Reviews: