Panasonic KX-TG2480 Operating Instructions Manual Download | Manualshive

Page: 53 / 60

background image

Useful Information

For assistance, please visit http://www.panasonic.com/consumersupport

53

When you hold the phone to your ear,
noise might be heard in your Hearing Aid.
Some Hearing Aids are not adequately
shielded from external RF (radio
frequency) energy. If noise occurs, use
an optional headset accessory or the
speakerphone option (if applicable) when
using this phone. Consult with your
audiologist or Hearing Aid manufacturer
about the availability of Hearing Aids
which provide adequate shielding to RF
energy commonly emitted by digital
devices.

WHEN PROGRAMMING EMERGENCY
NUMBERS AND(OR) MAKING TEST
CALLS TO EMERGENCY NUMBERS:
1) Remain on the line and briefly explain

to the dispatcher the reason for the
call.

2) Perform such activities in the off-peak

hours, such as early morning or late
evenings.

This device complies with Part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful
interference, and (2) this device must
accept any interference received,
including interference that may cause
undesired operation.

Privacy of communications may not be
ensured when using this phone.

CAUTION:

Any changes or modifications not
expressly approved by the party
responsible for compliance could void the
user’s authority to operate this device.

NOTE:

This equipment has been tested and
found to comply with the limits for a
Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are
designed to provide reasonable
protection against harmful interference in
a residential installation. This equipment
generates, uses, and can radiate radio
frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio
communications. However, there is no
guarantee that interference will not occur
in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by
turning the equipment off and on, the
user is encouraged to try to correct the
interference by one or more of the
following measures:

−

Reorient or relocate the receiving

antenna.

−

Increase the separation between the

equipment and receiver.

−

Connect the equipment into an outlet

on a circuit different from that to which
the receiver is connected.

−

Consult the dealer or an experienced

radio/TV technician for help.

Some cordless telephones operate at
frequencies that may cause interference
to nearby TVs and VCRs. To minimize or
prevent such interference, the base of
the cordless telephone should not be
placed near or on top of a TV or VCR. If
interference is experienced, move the
cordless telephone further away from the
TV or VCR. This will often reduce, or
eliminate, interference.

TG2480(e).book Page 53 Monday, August 7, 2006 10:32 AM

«
...
51
52
53
54
55
...
»

Summary of Contents for KX-TG2480





























































Reviews:

No comments

Related manuals for KX-TG2480

Brand: NEC Pages: 34

Brand: NEC Pages: 4

Brand: NEC Pages: 19

Brand: NEC Pages: 17

DSX-40 DEMO KIT

Brand: NEC Pages: 2

Brand: NEC Pages: 2

Brand: NEC Pages: 22

Brand: Evolveo Pages: 27

Brand: switel Pages: 44

Brand: VTech Pages: 8

Brand: Fortinet Pages: 271

Brand: Skil Pages: 10

Brand: VTech Pages: 2

Brand: Alcatel Pages: 74

Brand: Haier Pages: 28

Brand: AEG Pages: 176

Brand: Parkside Pages: 71

Brand: Sanyo Pages: 30

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands