Useful Information
44
Noise is heard during a call.
L
You are using the handset or base unit in an area
with high electrical interference. Place the handset
and base unit away from interference sources, such
as antennas and mobile phones.
The handset stops working while
being used.
L
Disconnect the AC adaptor and turn off the
handset. Connect the AC adaptor, turn on the
handset and try again.
Pressing
B
does not display/dial
the last number dialled.
L
The redialled number was more than 24 digits long.
Redial the number manually.
Mute does not turn off after the line
is connected.
L
Press
{
C/
T
}
.
The handset beeps intermittently
and/or
3
flashes.
L
Fully charge the batteries (page 12).
I fully charged the batteries, but
3
still flashes.
L
Clean the charge contacts and charge again (page
12).
L
It is time to replace the batteries (page 11).
Caller information is not displayed.
L
You must subscribe to Caller ID service.
L
Your unit is connected to a telephone line with
ADSL service. We recommend connecting a filter
(contact your ADSL service provider) to the
telephone line between the base unit and the
telephone line socket.
L
Caller has withheld information.
While viewing caller information,
the display returns to standby
mode.
L
Do not pause for over 1 minute while searching.
I cannot register a handset to a
base unit.
L
The maximum number of base units (4) are already
registered to the handset. Cancel unused base unit
registrations from the handset (page 35).
L
The maximum number of handsets (6) are already
registered to the base unit. Cancel unused handset
registrations from the base unit (page 35).
L
You entered the wrong PIN number. If you forget
your PIN, consult your nearest Panasonic service
centre.
L
Place the handset and the base unit away from
other electrical appliances.
Problem
Cause & solution
TG1861AL(e).book Page 44 Friday, March 31, 2006 3:28 PM
