Panasonic KX-TG1711BX, Operating Instructions Manual

Page: 21 / 64

Using Caller ID service
Important:
R This unit is Caller ID compatible. To use
Caller ID features, you must subscribe to a
Caller ID service. Contact your phone
service provider for details.
Caller ID features
When an outside call is being received, the
caller information is displayed.
Caller information for the last 50 callers is
logged in the caller list from the most recent
call to the oldest.
R If the unit cannot receive caller information,
the following is displayed:
–
“
Out of Area
” / “
OUTofAREA
”
*1
: The
caller dials from an area which does not
provide a Caller ID service.
– “
Private Call
” / “
Priv. Call
” *1 :
The caller requests not to send caller
information.
R If the unit is connected to a PBX system,
caller information may not be properly
received. Contact your PBX supplier.
*1 Shown while viewing the caller list.
Missed calls
If a call is not answered, the unit treats it as a
missed call and is displayed. This lets you
know if you should view the caller list to see
who called while you were away.
Even if only one missed call in the caller list is
viewed (page 21), disappears from the
display. When you receive another new call,
is displayed again.
Note:
R Even when there are unviewed missed
calls, disappears from the standby
display if the following operation is
performed by one of the registered
handsets:
– Being replaced on the base unit.
– Pressing
MeN .
Phonebook name display
When caller information is received and it
matches a phone number stored in the
phonebook, the stored name in the
phonebook is displayed and logged in the
caller list.
Caller list
Important:
R Make sure the unit’s date and time setting
is correct (page 12).
Viewing the caller list and calling
back
1
MFN ( )
2
Press MCN to search from the most recent
call, or press MDN to search from the
oldest call.
R If the whole phone number is not
shown, press
MEN to see the remaining
phone numbers.
R To switch the display from name or
phone number to date and time, press
MEN . To return, press MFN .
R If the entry has already been viewed or
answered, “ ” is displayed.
R If you do not want to dial the area code
when making calls from the caller list,
you can store the area code which you
want the unit to delete automatically
(page 20).
3
To call back, press M N .
To exit, press MeN .
Editing a caller’s phone number
1
MFN ( )
2
MbN : Select the desired entry. a
M N
3
MbN : “
Edit & Call
” a M N
4
Edit the number.
5
M N
21
Caller ID Service
KX-TG1711BXUE_eng_0223_ver001.pdf 21 2/23/2023 10:44:58 AM