Useful Information
20
Liquid damage
Caution:
L
To avoid permanent damage, do not use a microwave oven to speed up
the drying process.
Registering the handset to the base unit
1
{j
/OK
}
2
{v}
/
{e}
: “
SETTING HS
”
i
{>}
3
{v}
/
{e}
: “
REGISTRATION
”
i
{>}
4
{v}
/
{e}
: “
REGISTER HS
”
i
{>}
5
Press and hold
{x}
on the base unit for about 5 seconds.
L
If all registered handsets start ringing, press
{x}
to stop, then start
again from step 1.
L
The rest of the procedure must be completed within 4 minutes.
6
{v}
/
{e}
: Select a base unit number.
i
{>}
7
Wait until “
BS PIN
” is displayed.
i
Enter the base unit PIN (default:
“
0000
”).
i
{>}
L
If you forget your PIN, see page 21.
I fully charged the
batteries, but the
operating time seems to
be shorter.
L
Clean the battery ends (
S
,
T
) and the
charge contacts with a dry cloth, and
charge again.
Caller information is not
displayed.
L
You must subscribe to a Caller ID
service. Contact your service provider/
telephone company for details.
L
If your unit is connected to any
additional telephone equipment,
remove and plug the unit directly into
the wall socket.
L
If you use a DSL/ADSL service, we
recommend connecting a filter (contact
your DSL/ADSL service provider) to the
telephone line between the base unit
and the telephone line socket. Contact
your DSL/ADSL provider for details.
L
Other telephone equipment may be
interfering with this unit. Disconnect the
other equipment and try again.
Caller information is slow
to display.
L
Depending on your service provider/
telephone company, the unit may
display the caller’s information at 2nd
ring or later.
L
Move closer to the base unit.
I cannot remember the
PIN.
L
Change the PIN using the instructions
on page 21.
Problem
Cause/solution
Problem
Cause/solution
Liquid or other form of
moisture has entered the
handset/base unit.
L
Disconnect the AC adaptor and
telephone line cord from the base unit.
Remove the batteries from the handset
and leave to dry for at least 3 days.
After the handset/base unit are
completely dry, reconnect the AC
adaptor and telephone line cord. Insert
the batteries and charge fully before
use. If the unit does not work properly,
contact an authorised service centre.
TG1411_1412AL(e).book Page 20 Monday, December 14, 2009 4:28 PM
