Preparation
6
Battery installation
Important:
L
Use the supplied rechargeable batteries (Part No. HHR-55AAAB).
L
When installing the batteries:
−
Wipe the battery ends (
S
,
T
) with a dry cloth.
−
Avoid touching the battery ends (
S
,
T
) or the unit contacts.
−
Confirm correct polarities (
S
,
T
).
L
If the handset does not automatically turn on after installing batteries,
press
{ih}
for about 1 second, or place the handset on the base unit
or charger.
Insert the batteries negative (
T
) end first. Close the handset cover.
Turning the power on/off
Power on
Press
{ih}
for about 1 second.
Power off
Press
{ih}
for about 2 seconds.
Battery charge
Place the handset on the base unit or charger for about 7 hours before
initial use.
Battery level
Panasonic Ni-MH battery performance (supplied batteries)
Note:
L
It is normal for batteries not to reach full capacity at the initial charge.
Maximum battery performance is reached after a few complete cycles of
charge/discharge (use).
L
Actual battery performance depends on a combination of how often the
handset is in use and how often it is not in use (standby).
L
Even after the handset is fully charged, the handset can be left on the
base unit or charger without any ill effect on the batteries.
L
The battery level may not be displayed correctly after you replace the
batteries. In this case, place the handset on the base unit or charger and
Battery icon
Battery level
5
High
L
When flashing: Fully charged.
6
Medium
7
Low
L
When flashing: Needs charging.
Operation
Operating time
In continuous use
17 hours max.
Not in use (standby)
150 hours max.
TG1311_1312_1313BX(e).book Page 6 Tuesday, September 2, 2008 10:36 AM
