Useful Telephone Settings
15
*1 Only the emergency number setting is not reset.
*2 If you forget your PIN, see page 21.
*3 The recall/flash time depends on your telephone exchange or host PBX.
Contact your PBX supplier if necessary.
*4 If you change the PIN, please write down your new PIN as the unit will
not reveal it to you again.
*5 Call restriction feature restricts the handset from dialling certain phone
numbers. You can assign up to 10 phone numbers (memory locations
0–9) to be restricted.
*6 Emergency number feature determines which phone numbers may be
dialled while the call bar feature is turned on. A total of 4 emergency
numbers (memory locations 1–4) can be stored.
{
6
}
Call restriction
*5
■
Setting call restriction
−
Enter base unit PIN (default: “
0000
”).
*2
i
Enter
the desired handset number by pressing the
appropriate dial key.
L
The selected handset number flashes on the
display.
−
{>}
−
Enter the phone number to be restricted (8 digits
max.).
L
To select a different memory location, press
{>}
and enter a number.
−
{>}
■
Turning on/off call restriction
−
Enter base unit PIN (default: “
0000
”).
*2
L
Handset number is displayed. A flashing number
indicates call restriction is on; a non-flashing
number indicates call restriction is off.
−
Enter the desired handset number by pressing the
appropriate dial key to turn on/off.
i
{>}
2 times
Emergency number
*6
−
Enter base unit PIN (default: “
0000
”).
*2
i
{*}
■
Storing:
−
Enter the emergency number (8 digits max.).
L
To select a different memory location, press
{>}
and enter a number.
−
{>}
■
Editing:
Press
{>}
to display the desired number.
i
{
C
}
i
Enter the new emergency number.
i
{>}
Code No.
Feature (default setting)
{*}
Date and time: page 9
Code No.
Feature (default setting)
TG1311_1312_1313BX(e).book Page 15 Tuesday, September 2, 2008 10:36 AM
