manualshive.com logo in svg

Panasonic KX-TG1311BX, Operating Instructions Manual

Share
Download
Panasonic KX-TG1311BX Operating Instructions Manual Download Page 5

Preparation

5

Charger

The charger can be mounted on the wall, if required.

L

Use only the supplied Panasonic AC adaptor PQLV209BX.

Note:

L

Never install telephone wiring during a lightning storm.

L

Do not connect the AC adaptor to a ceiling-mounted AC outlet, as the 
weight of the adaptor may cause it to become disconnected.

During a power failure

The unit will not work during a power failure. We recommend connecting a 
corded-type telephone (without AC adaptor) to the same telephone line or 
to the same telephone line jack using a T-adaptor.

If you subscribe to a DSL/ADSL service

L

Please attach a DSL/ADSL filter (contact your DSL/ADSL provider) to 
the telephone line between the base unit and the telephone line jack in 
the event of the following:

−

noise is heard during conversations.

−

Caller ID features do not function properly.

Location

For maximum distance and noise-free operation, place your base unit:

−

away from electrical appliances such as TVs, radios, personal 
computers, or other phones.

−

in a convenient, high, and central location.

Available for:

KX-TG1312/KX-TG1313

(220-240 V AC, 50/60 Hz)

Hooks

25.2 mm

Screws

(Not supplied)

To telephone line

DSL/ADSL filter

TG1311_1312_1313BX(e).book  Page 5  Tuesday, September 2, 2008  10:36 AM

Summary of Contents for KX-TG1311BX

























Reviews:

No comments

Brands by name

Popular brands

Load more brands