Panasonic KX-TG1061M - Cordless Phone Base Station Service Manual Download Page 87

Page: 87 / 114

KX-TG1061M/KX-TG1062M/KX-TGA106M

13 Schematic Diagram

13.1. For Schematic Diagram

13.1.1. Base Unit (Schematic Diagram (Base Unit_Main))

Notes:

1. DC voltage measurements are taken with voltmeter from the negative voltage line.

2. The schematic diagrams may be modified at any time with the development of new technology.

13.1.2. Cordless Handset (Schematic Diagram (Cordless Handset))

Notes:

1. DC voltage measurements are taken with an oscilloscope or a tester with a ground.
2. The schematic diagrams may be modified at any time with the development of new technology.

13.1.3. Charger Unit (Schematic Diagram (Charger Unit))

Notes:

1. DC voltage measurements are taken with voltmeter from the negative voltage line.

2. This schematic diagram may be modified at any time with the development of new technology.

Summary of Contents for KX-TG1061M - Cordless Phone Base Station



















































































































Search results

Summary of Contents for KX-TG1061M - Cordless Phone Base Station

Reviews:

Panasonic KX-TG1061M - Cordless Phone Base Station, Service Manual, Page: 87 / 114

Search results

Summary of Contents for KX-TG1061M - Cordless Phone Base Station

Reviews: