Panasonic KX-TES824 Installation Manual Download Page 52

Page: 52 / 90

2.3 Installing Optional Service Cards

Installation Manual

2.3.7

Message Expansion Card for DISA/UCD OGMs (KX-
TE82491)

Function

When an optional message expansion card for DISA/UCD OGMs is added, up to 2 messages can be
played simultaneously for callers and the total recording time of the PBX is increased from 3 to 6
minutes.

Loosen the screws and open the top and bottom front covers. (

→

2.2.3 Opening/Closing Covers)

Slide the card between the guiderails until it clicks, and attach the connector to it.

Note

Use extra care to make sure you do not damage the part of the case marked with a circle.

Close the covers and secure the screws. (

→

2.2.3 Opening/Closing Covers)

Note

To uninstall the card, follow the instructions illustrated below.

Push the catch on the side of one guardrail in the direction of the arrow to release it.

Lift the edge of the card while holding the catch open. (Do not touch the circuit board of the card
during the operation.)

KX-TE82491

Summary of Contents for KX-TES824



























































































Search results

Summary of Contents for KX-TES824

Reviews:

Related manuals for KX-TES824

Brands by name

Popular brands

Panasonic KX-TES824, Installation Manual

Search results

Summary of Contents for KX-TES824

Reviews:

Related manuals for KX-TES824

Brands by name

Popular brands