Panasonic KX-TEM824 User Manual Download

Page: 95 / 167

1.7 Setting the Telephone According to Your Needs

User Manual

To talk with a person in the monitored room

To cancel a monitor

To stop a monitor temporarily while on-hook

•

You can monitor using a PT with an AUTO ANS/MUTE button or a single line telephone
(SLT) with a MUTE button.

•

The AUTO ANS/MUTE button light shows the current status as follows:

Off: Not set

Flashing red: Set (Ready for monitoring)

Press AUTO ANS/MUTE
or go off-hook.

Talk.

Off-hook.

On-hook.

Enter 735.

Enter 0.

Enter #.

C.Tone

At the monitored telephone

Press AUTO ANS/MUTE.

At the monitored telephone

Press the AUTO ANS/MUTE button
to start room monitoring again.

Summary of Contents for KX-TEM824








































































































































































Search results

Summary of Contents for KX-TEM824

Reviews:

Related manuals for KX-TEM824

Brands by name

Popular brands

Panasonic KX-TEM824, User Manual

Search results

Summary of Contents for KX-TEM824

Reviews:

Related manuals for KX-TEM824

Brands by name

Popular brands