Panasonic KX-TEM824 User Manual Download

Page: 3 / 167

User Manual

In this manual,

•

Proprietary Telephone is abbreviated as "PT"

Single Line Telephone is abbreviated as "SLT".

Proprietary Telephone with a Display is abbreviated as "Display PT".

•

The suffix of each model number is omitted.

•

The following icons are used as hints and conditions throughout this manual.

1.1 Before Operating a Telephone

For more details, consult your dealer.

In this manual, "proprietary telephone" ("PT") means an analogue proprietary telephone (APT).

A Panasonic telephone that is equipped
with a Navigator Key and a display helps
you to access various features easily.
The Message/Ringer lamp (if equipped)
informs you of any calls or messages
waiting.

Easy Operation

Navigator Key

Message/Ringer Lamp

This PBX can route incoming calls sent
from a Short Message Service (SMS) centre
to specific single line telephones (SLTs) that
support SMS.

Call Routing for Fixed Line SMS

Telephone

Company

SMS centre

Conditions

Hints

Summary of Contents for KX-TEM824








































































































































































Search results

Summary of Contents for KX-TEM824

Reviews:

Related manuals for KX-TEM824

Brands by name

Popular brands

Panasonic KX-TEM824, User Manual

Search results

Summary of Contents for KX-TEM824

Reviews:

Related manuals for KX-TEM824

Brands by name

Popular brands