Panasonic KX-TDE200, Getting Started

Page: 24 / 30

4.1 Programming the PBX
24 Getting Started for Physical Cards
Assigning the Incoming Trunk Call Destination
For analogue trunk users (DIL Setting):
1.
Under CO & Incoming Call , click DIL Table &
Port Settings .
2.
Confirm that the DIL tab is selected.
3.
Configure the settings as required.
4.
Click OK .
For ISDN trunk users (DDI Setting):
1.
Under CO & Incoming Call , click DDI / DID
Table .
2.
Configure the settings as required.
3.
Click OK .
For ISDN trunk users (MSN Setting):
1. Under CO & Incoming Call , click DIL Table &
Port Settings .
2. Click the DDI / DID / TIE / MSN tab.
3. Set the Distribution Method of the desired
ports to MSN .
4. Click OK .
5. Click MSN Table .
6. Click the MSN tab.
7. Configure the settings as required.
8. Click OK .