4.1 Programming the PBX
22
Getting Started for Physical Cards
4.1
Programming the PBX
Starting the Maintenance Console and Assigning the Basic Items (Quick
Setup)
1.
Connect the PC to the PBX with an Ethernet straight cable or RS-232C cross cable.
2.
Start the Maintenance Console from the Start menu.
3.
"Information before programming" appears.
a.
Carefully read this important additional information, which includes updates to this and other
manuals.
b.
Click
OK
to close this window.
4.
a.
Enter the Installer Level Programmer Code (default:
INSTALLER
).
b.
Click
OK
.
5.
Click
Connect
.
6.
a.
Select
KX-TDE100/200
from
PBX Model
.
b.
Select the
LAN
or
RS-232C
tab, depending on the type of PC connection with the PBX.
c.
Specify the settings as required.
Note
When connecting to the PBX for the first time selecting
LAN
, the
IP Address
and
Port Number
must be set to
192.168.0.101
and
35300
respectively.
d.
Enter the system password for installer (default:
1234
).
e.
Click
Connect
.
7.
When country/area data do not match:
a.
Click
OK
to replace the country/area data of the PBX. Replacement may take several minutes to
complete.
b.
Follow the procedure described in "Before Programming" and restart the PBX.
c.
Repeat step
5
to reconnect the Maintenance Console to the PBX.
8.
Follow the instructions of the Quick Setup wizard and assign the basic items (Quick Setup).
The system menu appears. You may now begin programming the PBX.
Summary of Contents for KX-TDE200
