manualshive.com logo in svg

Panasonic KX-TDE200, Installation Manual

The Panasonic KX-TDE200 is a versatile and powerful communication system. With its numerous features and capabilities, it's essential to have the Operator User Manual to maximize its potential. Download this manual for free from our website and unlock the full potential of your Panasonic KX-TDE200.

Share
Download
background image

3.6.5  SLC8 Card (KX-TDA0173)

Function

8-port extension card for SLTs with 2 power failure transfer (PFT) ports.

     

LED

Amphenol

To extensions

Accessories and User-supplied Items

Accessories (included):

 Screws 

´

 2, Ferrite core 

´

 1

User-supplied (not included):

 Amphenol connector

Note

•

Attach the included ferrite core to the cable. Refer to "3.2.9  Attaching a Ferrite Core".

•

To connect the Amphenol connector, refer to "3.2.10  Fastening an Amphenol Connector".

•

For details about power failure transfer, refer to "3.12.1  Power Failure Connections".

126

Installation Manual

3.6.5 SLC8 Card (KX-TDA0173)

Summary of Contents for KX-TDE200













































































































































































































Reviews:

No comments

Related manuals for KX-TDE200

Toshiba Perfecptione Installation And Maintenance Manual preview
Perfecptione
Brand: Toshiba Pages: 368

Brands by name

Popular brands

Load more brands