manualshive.com logo in svg

Panasonic KX-TDE100, Network Manual

The Panasonic KX-TDE100 is a versatile communication system that offers advanced features and flexibility for businesses. To make the most out of this product, it's essential to have the User Manual. Download the free manual from our website and explore the full potential of your Panasonic KX-TDE100.

Share
Download
background image

For KX-HGT100 SIP Telephones

1.

Using a DHCP server to automate the assignment of IP addressing information

The DHCP server automatically assigns the IP address of the KX-HGT100, the subnet mask address, and
the default gateway address to the KX-HGT100.
The PBX IP address can be assigned to the KX-HGT100 through Web Programming. For details, refer
to "4.4.1  Registering IP Telephones".
Follow the procedure below to assign IP addressing information automatically.

To set the IP address of the KX-HGT100

To start programming

Supply power to the KX-HGT100.

Press PROGRAM.

Select "Set network".

Press OK.

Select "DHCP".

Press OK.

To end programming

Press 

PROGRAM.

C. Tone

2.

Not using a DHCP server when assigning IP addressing information

The IP address of the KX-HGT100, the subnet mask address, and the default gateway address must be
assigned manually.
The PBX IP address can be assigned to the KX-HGT100 through Web Programming. For details, refer
to "4.4.1  Registering IP Telephones".

62

IP Networking Guide

4.3.1 Assigning the IP Addressing Information

Summary of Contents for KX-TDE100





































































































Reviews:

No comments

Related manuals for KX-TDE100

ATCOM IPPBX IP04 User Manual preview
IPPBX IP04
Brand: ATCOM Pages: 35
D-Link DVX-2004 User Manual preview
DVX-2004
Brand: D-Link Pages: 52
Panasonic KX-NS700 Feature Manual preview
KX-NS700
Brand: Panasonic Pages: 580
DVS Metaswitch Quick Start Manual preview
Metaswitch
Brand: DVS Pages: 10

Brands by name

Popular brands

Load more brands