When not using a DHCP server:
a.
Select
Disable
for the
DHCP Client
setting.
b.
For KX-TDE100/KX-TDE200, type the IP
address of the IPCMPR card in the
IP Address
for IPCMPR Card
box. For KX-TDE600, type the
IP address of the IPCEMPR card in the
IP
Address for IPCEMPR Card
box.
*1
c.
In the
IP Address for VoIP-DSP
box, type the IP
address of the DSP16 or DSP64 card.
*2
d.
In the
Subnet Mask
box, type the subnet mask
address of the network.
*3
e.
In the
Default Gateway
box, type the IP address
of the default gateway.
*4
f.
Click
Apply
.
8.
Follow the instructions of the Quick Setup wizard in Quick Setup.
After Quick Setup is completed, if the IP addressing information was not changed, the IP-PT
registration screen is displayed. For information on registering IP-PTs to the PBX, refer to "Registration
of IP-PTs" in "4.4.1 Registering IP Telephones".
Programming from the system menu
1.
The IP addressing information for the IPCMPR/
IPCEMPR card can also be assigned from the
system menu.
a.
Under
Configuration
, click
Slot
.
b.
Move the mouse pointer over the IPCMPR/
IPCEMPR card. A menu will be shown under the
mouse pointer.
c.
Click
Card Property
.
2.
When using a DHCP server:
a.
Click the
LAN Setting
tab, then select
Enable
for
the
DHCP Client
setting.
b.
Click
Apply
.
IP Networking Guide
37
4.1.1 Assigning the IP Addressing Information
Summary of Contents for KX-TDE100
